Newmarket Window Locks

Newmarket Window Locks

Newmarket Locksmith 647-866-0956

 

Newmarket Window Locks – Choosing Window Locks

Windows can present an opportunity for burglars and intruders to gain  Newmarket Window Locksentry into your home. True, and intruder can always just break window glass, the the noise of breaking glass is usually avoided by most intruders. But burglars are clever and can always find ways to break in without smashing the window glass.

Old windows framed in aluminum offer a simple entry point because they can be lifted right out of the channel and set aside without ever breaking the glass. This is easily prevented by carefully drilling a couple of holes in the window part of the frame. A couple of screws in those holes removes the possibility of someone lifting the window out.

Even when old aluminum windows are protected from being lifted out, those old locks common on these windows can easily be forced open with a small screwdriver. You can still make these old windows more secure by purchasing various locks at any hardware store.

 

You want to look for three things in a window lock.

Effectiveness is the most important. New window locks aren’t worth much if there not effective at stopping a burglar. Secondly, they should look nice and fit in with window style and decoration style of the room. Finally, they need to be affordable. Good effective locks shouldn’t break the budget.

 

The locks on old windows are not as effective as you might want, when it comes to your homes security. If you have more recently installed windows, they still might need some better locking systems. There are different kinds of locks for every style of window in use today. And any window style that is common in your community should have good locks available at your local hardware store.

Matching locks with your interior decorating might be more of a challenge, and may require visiting some on-line retailers. For some window styles, you can find locks that are practically invisible to anything less than close scrutiny. If all else fails, there’s always paint.

 

Matching the budget with a set of locks takes some consideration.

It’s hardly affordable to have someone intrude into your home. Not to mention the loss in sense of security and privacy. It’s best to consider how many windows you need new locks for, and spend as much as you can reasonably afford.

For sliding windows, there are some very effective locks that cost pennies. You can find wood dowel sticks at any hardware store. Cut to length and dropped into the window channel prevents it from being opened. You can even cut it an inch or two short to provide fresh air during the evening hours.

 

One of the best ways of locking your large patio doors is a dead-bolt.

They are very secure, and affordable. The can be installed at the top or bottom of the window and you can find ones with a key or simple lever actuation.

Window style is largest determination of what lock style you can use. But the hardware store in your area should carry locks for window styles common in your locality. Just remember the three criteria – effective, blending with the decor, and affordability.

 

Kitchener House Lockout

Kitchener House Lockout

Kitchener Locksmith 647-866-0956

 

Kitchener House Lockout – What To Do When Locked Out?

Most people have experienced the hassle of being locked out of the house at least once in their lives. House keys are commonly lost or left lying useless  Kitchener House Lockoutinside the house. Lockouts can happen to anyone in the most unexpected moments. Parents are particularly scared of being locked out because this means leaving their babies and toddlers alone in the house. It is always good to be ready for any emergency. Hence, it would be less stressful if a person has prior knowledge on what to do when locked out of the house. Obviously, it is a bad idea to leave doors and windows unlocked for the sake of preventing lockouts. There are safer and more effective options house owners can explore to avoid lockouts from happening.

 

Installing an electronic security entry is an almost foolproof way to ensure lockouts don’t happen. So that a key will not be necessary, a safety keypad can be installed on the front door or garage door. While this can be a pricey option, it is the most effective method to avoid being locked out. Electronic systems can be extremely useful for people who have little kids at home. However, as these electronic devices are reliant on electricity, doors may not open during power failures and brownouts.

 

In case of lockout, the house owner should always have access to keys by making duplicate keys. A duplicated key can be entrusted to a neighbor. While this practice is absolutely free, trust is always an issue. Homeowners should leave their spare house keys only to responsible and trustworthy neighbors. To make the arrangement mutually beneficial, the two houseowners can exchange keys in case one party gets locked out. One drawback of this method is that the neighbor should be at home when the lockout happens. If the neighbor entrusted with the key is not home, the method is a catch-22 for the home owner who is in a hurry to get inside the house.

 

Of course, house owners can always carry a spare key in the wallet, bag or briefcase.

They can also stash a duplicate in a hidden place in the car. A lot of people also leave duplicate keys in inconspicuous places within their houses’ premises. For instance, some people put their keys in fake rocks and place them in a garden among real rocks. However, there are bad places to store duplicate keys in. A homeowner should never leave a spare key under floor mats, on flowerpots, inside the mailbox, on a window ledge, on the dog’s collar and other obvious places.

 

In the event that a lockout does happen and a spare key is not available, the involved person should remain calm and focused. Unless it’s an emergency, it’s not advisable for the locked out person to kick the door or break the window. Doing so can injure the person or permanently damage the jamb, frame or door itself. Replacing door parts will be more expensive than hiring a locksmith, who is the best person to call during lockout emergencies. For easy access and contacting, a homeowner should store a local locksmith’s contact number in the mobile phone.

 

Vaughan Sturdy Locks

Vaughan Sturdy Locks

Vaughan Locksmith 647-866-0956

 

Vaughan Sturdy Locks – 5 TypesVaughan Sturdy Locks

When you are locked out of a house, a room, a car, an office cabinet, a safe, or a storage box, you need to call someone to help you get to or into the locked space. The locksmith will likely come in a business van that has everything in it he could possibly need because he won’t want to waste his time nor yours. Locks come in various shapes and mechanisms and he has to be prepared for all of them.

 

1) Dead bolts

Dead bolts are a safety feature for your home. They are not all the same. Dead bolts that are standard single sided have a cylinder for the key on the outside of the door. On the inside they have a rosary knob that turns to open or lock the dead bolt from the inside. Your locksmith may recommend a safer dead bolt than the standard single. The double dead bolt is a bit safer because it is locked on both sides of the door with a key. A third type of dead bolt is the safest of the dead bolts. It does have a thumbturn on the inside but can also be locked with a key.

 

2) Mortise Locks

Businesses generally use these types of locks. You can find these locks on some glass doors, apartment doors as well as some doors to businesses. Your locksmith will know exactly how to deal with Mortise locks. They are screwed into hardware in the center of the door. Set screws that have cams attached to the back of the screws will hold the lock in place.

 

3) Lever Handle Locks

These are mostly used for the inside of an office. A home could actually be equipped with these locks as well but this would be a rare occasion. They are used in offices more than the knob locks because they can be easier to use. Pushing down on a lever is easier for someone handicapped than turning a knob.

 

4) Padlock

These locks are a locksmith’s dream. They are one of the simplest locks to open. Some padlocks can be re-keyable, others not. In addition, some padlocks retain their key when the lock is unlocked so that the key cannot be removed. Other padlocks are bolt-cutter resistant by having a shrouded shackle. It is a part of the lock that raises up, thereby preventing bolt cutters to get a good grip.

 

5) Combination Lock

Fairly inexpensive combination locks are used for all kinds of purposes. Those combination locks usually have only three numbers or letters. The more sophisticated combination locks are installed on safes, including those in banks, and a locksmith must be quite skilled to open those. The mechanism operates by having several rotating discs and cams that work by interacting with the locking device directly or electronically.

 

Kitchener Commercial Lock Styles

Kitchener Commercial Lock Styles

Kitchener Locksmith 647-866-0956

 

Kitchener Commercial Lock Styles

You have two options when choosing a lock for your door – mortise and tubular. Which is the right style of hardware for you?

When choosing the right type of steel Kitchener Commercial Lock Stylescommercial door for your project, one of the hardware components you must always consider is the lock style. With doors, you have two options, either a mortise lock or a tubular lock. The only way to decide on which is the most accurate for any project is to know the difference.

Mortise style locks are by far the more secure of the two, but tubular locks are far more popular, particularly among residential settings. There are many reasons to explain this disparity, including the easy install one has over the other. However, to really know which lock is right for you, you must know what each style entails.

 

Mortise locks feature a deep cut in the door.

This cut provides ample room for a mortise to slide within the pocket. This deep pocket provides unparalleled protection. Because of this special, deep cut feature, doors need to be specially prepared to handle this style of lock. This includes using a mortise saw to cut into the door.

A mortise saw is a vital piece of door-preparation treatment, as all mortise locks possess the same dimensions.

Tubular locks are popular among residential doors, and with office doors as well. The popularity of this style of lock can be traced to its great security (though not as secure as a mortise lock), and ease of install. Also, tubular locks have proven to be easy to replace, so long as standard bore holes already exist within the door. There are two popular types of tubular style locks – single cylinder and double cylinder.

 

But which lock is proper for your project?

Certainly your project requires a handful of doors, and realistically it’ll require more than one style of door. The chances of you needing both a mortise and tubular lock are likely. More importantly is it for you to know where to apply these locks.

Your most exterior doors are your first line of defense. These doors are the ones that should feature the most secure options, from the style of steel commercial door you choose, to the type of hardware. These doors require mortise locks. It’s not worth the chance of installing a less secure tubular lock to your main access points.

That being said, there is always a place for tubular locks, particularly when you factor in the ongoing maintenance of operating a facility. The cost effectiveness of a tubular lock (namely its ease of repair and replacement) make it a worthwhile solution for a number of interior doors that serve more as partitions than as barriers of protection. Offices come to mind as a great place for this style of hardware.

In the end, a good way to decide on your lock style is to consider the purpose of the door. If the door is meant to be a secure barrier, go with mortise. If it’s serving more of a privacy and partition role, tubular is acceptable.

 

The chance of your steel commercial door serving the role of barrier of protection is high, which is why it’s likely you’ll require mortise locks. However, your project may also benefit from tubular locks as well. The best way to determine your necessary lock styles is to work with a trusted commercial door and hardware dealer who can guide you in the right direction. Kitchener Commercial Lock Styles has the expertise and inventory to provide you with the necessary knowledge and materials to move forward.

 

Waterloo External Doors Locks

Waterloo External Doors Locks

Waterloo Locksmith 647-866-0956

 

Waterloo External Doors Locks And Bolts

Bolts can be used to provide extra security on external doors fit one to both  Waterloo External Doors Lockstop and bottom of the door. Barrel, padbolts and tower bolts can be screwed to the sur¬face of a door. Each has a long bolt which is generally shot into a staple (a hoop of metal) fixed to the door frame. Always choose a bolt with a heavy-duty staple and long fixing screws. Alternatively, the bolt may be shot into the sill or floor or into the door frame.

The bolts are neither key-operated nor deadlocking and so may be easily undone if access is possible. If you want to use one near glass, chose a padbolt – these can be secured by a padlock.

Flush bolts work in a similar way to tower and barrel bolts – in that they shoot a bolt into the frame and are non-locking – but they are designed to be mortised into the edge or face of the door. This makes them particularly suitable for double doors or where a concealed fitting is required.

 

Locking bolts

You can get key – operated bolts which fit on the face of a door, but the better choice for a normal door is a mortise rack bolt.

For double doors which open out – wards, fitting a mortise rack boll can be difficult and there is a special type of locking bolt which is fitted to the inner surface of the door and shoots a bolt up into a staple fitted to the underside of the top of the door frame. The lock is pushed to close: a key is needed to open it.

Because these locks are operated from the inside, they do not have as many key differs as external door locks.

 

Mortise rack bolts

These can be mortised into the edge of a wooden door and should be fitted so that the key is on the inside face. They are inconspicuous when fitted and will resist some forcing. The deadbolt is operated by a key and enters a striking plate mortised into the door frame. Each model usually has one universal key only. Some mortise rack bolts can be unlocked without a key these should not be used next to glass.

You should fit mortise rack bolls to both the top and the bottom of a door: on French windows, fit four not just two on the closing leaf. To do this you have to cut a mortise in the edge of a door in a similar manner to that described for Fit¬ting a mortise deadlock -but in this case the hole for the key should not be drilled right through the door.

 

Padlocks

These can be used with a hasp and staple (together often called a padlock bar) to lock garden sheds, garages and so on. The hasp is fitted to the door or gate and the staple to the frame. The padlock locks the two together. Choose a heavy-duty hasp and staple with fixing screws which are concealed when the padlock is in place. Use a closeshackle padlock which has the hoop (shackle) close to the body of the lock.

 

Other security devices for doors

Hinge bolts (sometimes called dog bolts). These provide protection against forcing (or even removal) of a wooden door from the hinge side, particularly doors which open outwards. The bolt enters the striking plate when the door is closed. They should be fitted to the top and the bottom of a door, close to the hinges. The bolt is usually mortised into the hinge edge of the door, but it may be surface mounted. The striking plate is rebated into the frame in a similar way to a mortise lock.

 

Door chains

These prevent a door being opened more than a small amount (the chain is about 200mm long). A door limiter serves a similar function, but neither will provide more than limited protection, especially when the door is partly open. For full protection, a locking door bar is needed.

When fitting a door chain, position it close to the centre of the door and close to the edge to prevent marking the door when it is opened. The actual fixing is simple the chain receiving plate should be screwed to the door and the chain holding plate to the frame.

 

Door viewers

These allow you to see out-side the door without opening it. Different models have different angles of vision – normally between 150 and 175 degrees. Choose one with as wide an angle as possible. Some models are made to fit different door thicknesses.

A door viewer should be fitted centrally in the door at eye-level and should be used in conjunction with a porch light.

 

Kitchener Deadbolt High Security

Kitchener Deadbolt High Security

Kitchener Locksmith 647-866-0956

 

Kitchener Deadbolt High Security

Most people know what a Deadbolt Lock is, but be careful because not all  Kitchener Deadbolt High Securitydeadbolt locks are created equal. There are differences and these differences could mean preventing someone from breaking into your home. I am going to give you the information you need to make an informed decision when you walk into a store to purchase a deadbolt lock.

The first decision you need to make is do I buy a single cylinder or double cylinder deadbolt lock? A single cylinder is normally used on a solid door with no glass; this type uses a key on the outside and a thumb-turn lever on the inside. A double cylinder deadbolt uses a key on both the outside and inside, this type is normally used when there is glass on or near the door.

Once you decide on the lock cylinder type, you should look for the following:

  • The locking bolt should be at least 1″ in length (past the door edge). This will prevent prying the door open.
  • The locking bolt should be made out of solid steel with a hardened steel insert. This will prevent someone from sawing the locking bolt.
  • There should be a “Free Spinning” guard around the outside of the lock. This prevents someone from using a wrench to turn the deadbolt lock.
  • The inner lock mechanism should be protected by a steel shroud. This shroud goes over the mechanism and between the outer and inner door.
  • Choose a high security lock cylinder. This will prevent lock picking.
  • Metal strike with 2.5″ to 3″ bolts. The metal strike fits on the door jamb; this is what the locking bolt protrudes into. The 2.5″ to 3″ bolts are very important; you want these to screw into the door jamb, then into the supporting frame that supports the door jamb.

 

Some of the other questions will be color and finish. Make sure that the finish is weather resistant; this will prevent the lock from losing its color and finish. Also, do you want all the locks to be keyed alike? This is where one key will open all your locks.

I don’t think that I could discuss deadbolt locks without mentioning the door itself. You could buy the best deadbolt lock, but if the door that it mounts on is inferior, you will have no security. The door should be solid, meaning solid wood, steel or fiberglass. A wood door should have no rotten areas and a steel door should have no rust. The door jamb should be solid and it should be supported by a solid frame.

To properly secure your home, every exterior door should have a good quality deadbolt lock.

 

Cambridge Deadbolt Lock Installation

Cambridge Deadbolt Lock Installation

Cambridge Locksmith 647-866-0956

 

Cambridge Deadbolt Lock Installation

A deadbolt is a special kind of lock. These locks are far more secure than the Cambridge Deadbolt Lock Installationold locks with keys. This is because the weight of these locks is more than a normal one and it takes time for the burglars to break in.

A deadbolt is not like a spring bolt which can be easily opened, a dead bolt does not open unless the lock cylinder is rotated.

A slight variant of the standard deadbolt is the vertical deadbolt. The vertical deadbolt generally rests on top of a door. Vertical deadbolts avoid insertion of pry bars between the door and the frame and hence are safer.

The common types of a deadbolt lock are:

  1. Single Cylinder
  2. Double Cylinder
  3. Single Cylinder with removable thumb turn

 

Many designs are available from manufacturers.

Different manufactures have various designs which offer solution to defend the lock from being picked or opened with force or any other method. However, most manufacturers offer product lines of deadbolts that promise higher levels of resistance to break and entry and defeating than other product lines by the same manufacturer

For a deadbolt installation, a locksmith will charge about $125. You yourself can buy and install one for only about $35. Given that the exterior door is made of wood, then deadbolt can be installed quite easily. In case you have a steel or fiberglass door, hire a locksmith to do the job. This is because machines such as takes heavy-duty drills and bits are used to cut into these tougher materials.

Deadbolt installation involves the drilling of two holes in the door. One hole goes in the edge of the door which receives the lock assembly. The other hole goes in the face of the door. This hole accommodates the lock cylinder. Deadbolt installation then involves drilling another hole in the door jamb which is for the strike plate. The deadbolt lock” comes with paper templates. You tape these templates to the door and the jamb which aligns the holes correctly. Finally, the lock mechanisms are assembled the door and the strike plate is screwed to the jamb, often using extra-long screws.

 

While installing a deadbolt lock always ask about getting a new deadbolt which can be keyed to exactly match your existing entry lock. A bonded locksmith can do this. He will require you to provide a copy of the existing key. In some cases, it may also be more practical to replace the entry lockset at the time of installation of the deadbolt with a model that is compatible with the deadbolt.

 

Many communities forbid the use of double-keyed deadbolts. This is because there is a key instead of having a latch on the inside. In case of a fire, a panicked victim might be unable to unlock the door if the key to the door is missing. In case you have a glass panel in your door and you want to increase security, you can instead use laminated safety glass. You can also use polycarbonate plastic.

 

Emergency Waterloo Services

Emergency Waterloo Services

Waterloo Locksmith 647-866-0956

 

Emergency Waterloo Services

Have you ever been locked out of your car, office or home? Locking out is a  Emergency Waterloo Servicesserious situation and can be very frustrating, especially at the odd-hours. Such a situation requires immediate attention by an expert. Emergency locksmith services are available round the clock to help people facing any type of lock related problems.

There are many advantage associated with hiring emergency locksmith services for your home, car or office. These people are experts in dealing with locking systems of commercial and residential properties as well as cars and safes

.

Some of the advantages of hiring these services are mentioned below:

1) All Time Availability– The most important part of these services is their round the clock availability. An emergency situation can happen anytime and anywhere and it is always helpful if someone can come to your rescue even in the middle of the night. Emergency locksmith services consider safety and security of their client as their prime responsibility.

2) Insurance– Most emergency locksmith services are insured. This means that if any damage occurs to your locking system during repair, the concerned company will bear those losses.

3) Fast and Reliable– When you call for these services, you will see that they have very high response time. This means that you will get quick help wherever you are. These services are also very reliable and ensure peace of mind to its customers.

4) Skilled Professionals– Companies offering emergency locksmith services have well-trained and skilled staff. They are equipped with all the latest tools and equipment needed to handle all types of lock related problems. They have knowledge of different locking systems installed in homes, offices and luxury cars. All these technicians are certified and can be trusted completely. They offer lockout solutions and are trained in making new keys and solving mechanical and electrical locks.

5) Safety and Security– Burglaries have become very common today in both residential and commercial properties. Emergency locksmith services can help you in installation of a safe and secure locking system for safes and drawers.

 

Emergency locksmith services have become need of the hour. They offer peace of mind to the users. There might be a number of companies in your area offering these services. It is important that you do proper research before hiring any such company. Only a reputed and experienced company will be able to offer you quality services.

 

Waterloo Key Replacement

Waterloo Key Replacement

Waterloo Locksmith 647-866-0956

 

Waterloo Key Replacement

We are constantly reminded by our Waterloo Key Replacement elder to have a spare key for your car, house, office, etc, but mostly we overlook this advise until we find ourselves stuck in such situation, where we have no idea what to do with a locked car and keep cursing our memory. “I lost my keys” is used by many people frequently, that is why there are many alternative solutions to this problem. Waterloo Locksmith are our savior in such a situation.

 

DEPENDING UPON THE TYPE OF CAR-

So if you have lost the keys and had no spare key, then you need to deal with either employee dealership or a locksmith. Depending upon the condition of your car, you can make the decisions. If your car is old-fashioned it is better to visit the locksmith as they have the proper experience and will easily make you the replacement of key. But if your car is new, and due to technological advancement, the locksmith may not be able to help, in such case go to the dealership showroom.

 

LOSING KEY MAY TURN OUT TO BE AN EXPENSIVE AFFAIR-

Gone are the days when you just need to give your VIN Number to the dealer and get the new set of keys in very less amount. But due to technological advancements and security reason, now the keys of modern cars are integrated with a computer chip, and the vehicles are programmed to accept the inputs from the integrated chip-keys. This is very helpful for the security of the vehicle, as the thieves need to re-program the vehicle which takes around 30 minutes or more, and definitely, thieves cannot afford such a long duration to steal the car. So if you lost the chipped-keys, you should definitely go to the dealership shop that will re-program it and gives you the new set of chipped-keys. It may cost you 100$ or more unlike the cost of new keys from locksmith which may cost you 10$ or more.

 

PRECAUTIONS IS BETTER THAN CURE-

You are lucky if you haven’t found yourself in such a situation or if you had then it is necessary to take the precautions to avoid the same mistake in the future course of actions. Get yourself a smart key tracker. It is a chain type device that you can attach to keys so that whenever you lose your keys, a notification will pop-up on your cell phone informing about the place you left in the map. You can easily track it and keep the record. Another precaution you can take is to add the replacement cost of keys under your car insurance policy and free yourself from the stress of expenses to be incurred in such situations. It may sound mundane, but you should keep a copy of the key at your family or friends house, as the amount of getting a spare key is way too less than the replacement amount.

 

Aurora Sliding Glass Door Replacement

Aurora Sliding Glass Door Replacement

Aurora Ontario Door Repair 647-866-0956

 

Aurora Sliding Glass Door Replacement

There are so many different DIY handyman projects homeowners can Aurora Sliding Glass Door Replacementundertake all by themselves. And then there are those home projects that truly require a professional touch. Sliding glass door replacement or repair is one of those projects. When you consider the needs and skills it requires to accurately replace or repair sliding-glass doors, you can better understand why a professional door repair contractor is the only person who can get the job done effectively and in a time-frame that’s convenient for you. Continue reading to learn why it is so strongly encouraged to hire a professional for sliding glass door replacement and repair.

 

Glass Patio Door Replacement

One of the first areas to consider is transportation. Picking out new doors and buying them are the easiest parts of the process. But many do not think about how they are going to get them home. Standard sliding doors range in size, either measuring around five feet by five feet, or measuring around six feet by six feet. With these kinds of dimensions, they will not fit in most cars or SUV’s. Homeowners would have to borrow or rent a truck large enough for this size door, as well as, purchase additional supplies and products to protect it and move it in a safe manner. And don’t forget how heavy they are! This is another reason why a professional is best. They retain the proper trucks and transportation tools to safely transport glass products from warehouse to home, without a problem.

 

The next important aspect to think about when it comes to glass sliding door replacement and installation is the tools and resources needed to get the project done properly and efficiently. This can inflate a homeowner’s budget drastically. Padding, pry bars, levels, putty knives, caulk and gun, and standard handyman tools are just enough to get the door installed. But usually, additional work is required for the trim and the threshold. For this kind of work, you need advanced tools and resources; ones that only a professional door repair contractor would own.

 

Lastly, glass sliding door installation is not a recommended or wise DIY job because it requires skill and experience to complete the project accurately and in a convenient amount of time. Doing this kind of work on your own can cost you ample amounts of money, time, frustration, and more. Trust a professional to undertake a door replacement or repair project for the best and most cost-effective outcomes.