Hamilton Patio Door Locks

Hamilton Patio Door Locks

Hamilton Locksmith (905) 963-1289

Hamilton Patio Door Locks

Simple Procedures in Replacing Sliding Patio Door Locks

Glass doors will look great for your home together with all its functional Hamilton Patio Door Locksbenefits. The good news is that you don’t have to worry about its security since sliding patio door locks are already available to keep your home secured. Many online stores now offer a lot of different lock types that will be suitable for your design preference for your home.

However, these sliding patio door locks are not forever as they may also get broken after some time. This will require you to know how to replace them on your own especially if you want to save money from getting services.


In getting replacement sliding patio door locks, manufacturers have already included step-by-step instructions on how to replace these locks on your door. But if you want to have an idea on how this is done, you may want to take note of the following steps to know if you will exert effort in doing this procedure.


First of all, you have to know the manufacturer of the lock that you had on your door. Your door may have specific requirement when it comes to door locks so it means that you have to know the model of the lock pre-installed on it.


After buying the replacement lock, you have to open the door until it’s fully opened.

This will give you enough space to remove the lock that you had on it. Typically, sliding patio door locks have two pieces brought together by screws. So in removing the screws, you need to support the exterior part when you have already removed the screws in order to avoid scratching your door. Remove the lock after unscrewing.


After removing, you now need to place the replacement lock on the door.

You will just do the same procedure but in a reversed manner. Distinguish Hamilton Patio Door Locksthe interior and exterior parts of the locks to install them without any problems. Support the lock as you screw them together to tighten. Place the new door strike and move the door to line them properly. If the lock is still not lining up, you have to loosen the lock again then move the door until they latch properly. You can tighten them again after this procedure.


Overall, replacing sliding patio door locks is simple as noted by these steps. Remember to follow the instructions on the lock properly so you will not have any problems in installing them when your lock got broken.


Leave a comment

Your email address will not be published. Required fields are marked *